Industrial Products

V&G SATA3 OSSD

V&G SATA3 OSSD
The V&G Inc OSSD is designed optimally for a wide range of embedded applications The supported densities range u
Production Introduction:
The V&G Inc. OSSD is designed optimally for a wide range of embedded applications.
The supported densities range up to 32GB/64GB/128GB/256GB/512GB for different storage Requirements with the pre-programmed firmware and unsurpassed reliability and Performance.
The V&G Inc. OSSD is the ultimate non-volatile storage solution that is easy to design and manufacture for today’s fast-moving consumer and industrial applications.

Key Features

Host Interface
-Industrial Standard SATA Revision 3.1 compliant
-Industrial Standard ATA/ATAPI-8 and ACS2 command compliant
-Supports SATA interface rate of 6Gb/s(Backward compatible to 1.5Gb/s and 3.0Gb/s)
-Supports Native Command Queuing up to 32 commands
-SATA Device Sleep(DevSleep)
-Supports PHY Sleep mode(Cfast PHYSLP)
-Supports 28-bit and 48-bit LBA(Logical Block Addressing) mode commands
 
◆Enhanced ECC
-Advanced hardware BCH ECC engine 66bits per 1KB
 
◆Full disk encryption with AES 128/256
-Real time full drive encryption with Advanced Encryption Standard(AES)
-Trusted Computing Group(TCG) Opal protocol
-Hardware SHA 256 and True Random Number Generator(TRNG)
 
◆Advanced Global Wear Leveling
-Fully utilizes each cell to even program/erase count across management units/die(s)
-Maximizes product lifespan with minimal wear leveling and write amplification overhead
 
◆Robust Data Protection
-Static Data Refresh
-Early weak block retirement option
-Software/Hardware write protect option
-Multiple data security zones
-Data shaping for higher data reliability
 
◆Trim Command
-Supports Trim Command based on ATA-8
 
◆Health Status Monitoring
-Supports SMART commands to enable product life monitoring and user alert
 
◆Upgradeable Firmware
-Supports firmware in system programming(ISP) function for firmware upgrade
 
◆Power Management
-Prevents data corruption in case of sudden power-off
-Automatic sleep and wake-up mechanism to save power
 
◆Low Power Consumption
-Typical Read/Write :1.00W
-Slumber Power Mode :0.35W
-DEVSLP Power Mode :0.35W
 
◆Temperature
-Operating Temperature : Commercial(0℃~70℃), Industrial(-40℃~85℃)
-Non-Operating Temperature and Storage : -55℃~85℃
-27mm x 47mm x 2.00mm(Thickness) 77LGA